Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Edco Manuals
  4. Grinder
  5. MAGNA-TRAP TMC-7
  6. Operator's instruction manual

Edco MAGNA-TRAP TMC-7 Operator's Instruction Manual

7 inch turbo / edge grinder
Hide thumbs Also See for MAGNA-TRAP TMC-7:

Advertisement

Quick Links

Download this manual
E-TMC7-I-0119
E-SPTS-I-0809
EQUIPMENT DEVELOPMENT CO., INC.
Operator's Instruction Manual
TMC-7
MAGNA-TRAP
7" TURBO / EDGE GRINDER
®
Available in Gasoline and Electric
READ AND UNDERSTAND THE OPERATOR'S SAFETY MANUAL THOROUGHLY
BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT.
Death or serious injury could occur if this machine is used improperly.
Machine specific Operator's Instruction Manuals are offered at edcoinc.com/customer-resources/manuals-parts-lists/
READ AND UNDERSTAND THE ENGINE MANUFACTURERS INSTRUCTIONS AND OPERATORS MANUAL BEFORE OPERATION.
EQUIPMENT DEVELOPMENT COMPANY, INC.
Printed in USA
©2019
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone: 800-638-3326 or 301-663-1600 • Fax: 800-447-3326 or 301-663-1607
Website: www.edcoinc.com • E-mail: techsupport@edcoinc.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the MAGNA-TRAP TMC-7 and is the answer not in the manual?

Questions and answers

Related Manuals for Edco MAGNA-TRAP TMC-7

Summary of Contents for Edco MAGNA-TRAP TMC-7

  • Page 1 E-TMC7-I-0119 E-SPTS-I-0809 EQUIPMENT DEVELOPMENT CO., INC. Operator’s Instruction Manual TMC-7 MAGNA-TRAP 7″ TURBO / EDGE GRINDER ® Available in Gasoline and Electric READ AND UNDERSTAND THE OPERATOR’S SAFETY MANUAL THOROUGHLY BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT. Death or serious injury could occur if this machine is used improperly. Machine specific Operator’s Instruction Manuals are offered at edcoinc.com/customer-resources/manuals-parts-lists/ READ AND UNDERSTAND THE ENGINE MANUFACTURERS INSTRUCTIONS AND OPERATORS MANUAL BEFORE OPERATION.
  • Page 2 E-TMC7-I-0119 SAFETY INFORMATION SAFETY MESSAGES ELECTRICAL POWERED EQUIPMENT CONTINUED • Safety Instructions are proceeded by a graphic alert symbol of DANGER, • Do not disconnect power by pulling cord. To disconnect, grasp the WARNING, or CAUTION. plug, not the cord. EQUIPMENT DEVELOPMENT CO., INC.
  • Page 3 Specifications & dimensions are for HOW TO ORDER REPAIR PARTS reference only and subject to change. To insure product safety and reliability, always use genu- ine EDCO replacement parts when making repairs to the Length (L) 40” 102 cm equipment.

  • Page 4: Safety Guidelines

    E-TMC7-I-0119 EQUIPMENT DEVELOPMENT CO., INC. Read and understand all operating instructions before operating this equipment. Death or serious injury can result if this machine is used improperly. Safety Guidelines Eye and ear protection must be worn at all times while the grinder is in use. During normal operation, sound pressure levels may exceed 85dBA.

  • Page 5: Operating Instructions

    About the TMC-7: • The EDCO edge grinders are designed to be used in conjunction with other EDCO surface preparation products. It’s small, lightweight construction allows the operator to grind close to obstacles. These units are equipped with a single 7” diameter Diamond Segmented Disc that is an aggressive surface material grinder for removing excess concrete, epoxy mortar, urethane coatings and overlays, and non-skid abrasive coatings on steel, concrete, or polymer slab floors.
  • Page 6 • The EDCO industrial VAC’s have available optional HEPA filter kits designed to be used when removing hazardous materials. Standard, shop-vac style vacuums are not capable of extended operation. In addition, these standard vacs use paper bag filters that can clog and overload the vacuum motor.
  • Page 7 E-TMC7-I-0119 E-SPTS-I-0809 EQUIPMENT DEVELOPMENT CO., INC. Operating Instructions For Edge Grinding • Pivot handle and rear wheel frame to allow machine to get as close to wall as possible. (Figure 2) Pivot flat side of hood toward the wall. Replacing the Diamond Grinding Disc: •...
  • Page 8 E-TMC7-I-0119 EQUIPMENT DEVELOPMENT CO., INC. Read and follow Repairs are to be done instructions in the engine by authorized EDCO owner’s manual. Dealers only. Maintenance Make sure the throttle is completely closed (full stop position) to insure the engine will not accidently fire (kick back) while performing any maintenance.
  • Page 9 E-TMC7-I-0119 E-SPTS-I-0809 EQUIPMENT DEVELOPMENT CO., INC. DUST AND CRYSTALLINE SILICA WARNING Grinding/cutting/drilling of masonry, concrete, metal and other materials can generate dust, mists and fumes containing chemicals known to cause serious or fatal injury or illness, such as respiratory disease, cancer, birth defects or other reproductive harm. If you are unfamiliar with the risks associated with the particular process and/or material being cut or the composition of the tool being used, review the material safety data sheets and/or consult your employer, the manufacturers/suppliers, governmental agencies such as OSHA and NIOSH and other sources...
  • Page 10 E-TMC7-I-0119 EQUIPMENT DEVELOPMENT CO., INC. NOTES               This page intentionally left blank. Page 10 800-638-3326 • edcoinc.com • sales@edcoinc.com...
  • Page 11 *Seller reserves the right to alter payment terms. EDCO will, at its option, repair or replace, at the EDCO factory or at a point designated by EDCO, any part which shall appear to the satisfaction of EDCO inspection to have been 3.
  • Page 12 EDCO product group. The information in these tracks help businesses be successful with those products. EDCO is always updating online training / information so you always have the most recent content. Also see Operator’s Safety & Limited Warranty Manual Equipment Development Co., Inc.