Ariens Professional Sno-Thro Series Service Manual page 12

18. Remove hardware retaining belt finger to engine and
remove belt finger. See Figure 9.
WARNING: AVOID INJURY. Attachment sheave
edges are sharp. Wear thick gloves to remove
belts from attachment sheave.
See Figure 10.
19. Remove attachment drive belts from attachment
sheave.
To assist belt removal, slowly pull recoil starter handle
while gently pulling belts from attachment sheave.
Figure 9
Figure 10
See Figure 11.
20. Position support, such as a trash can, under
handlebars so tractor / frame remains upright when
separated from auger housing.
21. Chock or block wheels to prevent tractor / frame
movement.
EN – 11
Figure 11