Set The Key Tone; Set The Flash Time; First Ring Function; Reset Your Base - Geemarc CL595 User Manual

12.1.4 Set the Key Tone

The key tone is a confirmation beep when you press any key. It is set on by default but can be turned
off, if desired.
1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
4. Press MENU/OK to confirm.
12.1.5

Set the Flash Time

The default flash time is best suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. Press MENU/OK and
2. Press MENU/OK and
1. Press MENU/OK and
3. MEDIUM=300ms, LONG=600ms).
4. Press MENU/OK to confirm.
12.1.6

First ring function

Sometimes, our phone rings one time to inform that we have any voice message on the line. To remove
this ringer, you must activate the function.
1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
4. Press MENU/OK to confirm.
12.1.7

Reset Your Base

You can reset all of your base settings to their default settings. After a reset, all your personal base
settings, call list entries, redial list entries and answering messages will be deleted.
1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
4. Press MENU/OK and
5. Press MENU/OK to confirm.
/ to select BS SETTINGS.
/ to select KEY TONE.
/ to select ON or OFF.
/ to select BS SETTINGS.
/ to select FLASH TIME.
/ to select the desired flash time (SHORT=100ms,
/ to select BS SETTINGS.
/ to select FIRST RING.
/ to select ON or OFF.
/ to select BS SETTINGS
/ to select BS DEFAULT.
/ to select DEFAULT.
the display shows "CONFIRM?".
27