Activate Or Deactivate The Remote Access; Function Message Alert - Geemarc CL595 User Manual

17.5.8.2 Activate or Deactivate the Remote access

1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
4. Press MENU/OK and
5. Press MENU/OK to confirm.
17.5.9

Function message alert

When you have a new message, you can hear a beep every 10 seconds.
If you want deactivate this beep, follow the procedure.
1. Press MENU/OK, and ▼/▲ to select ANS.SYS.
2. Press MENU/OK, and ▼/▲ to show SET TAM.
and ▼/▲ to select MSG ALERT.
3. Press MENU/OK
and ▼/▲ to select OFF.
4. Press MENU/OK
5. Press MENU/OK to confirm.
/ to select ANS. SYS.
/ to select SET TAM.
/ to select REMOTE ACC.
/ to select ON or OFF to turn on or off the remote access respectively.
36