Table of Contents
Advertisement
ANSWERING MACHINE
Room Monitoring
This remote access feature enables you to call your home and turn ON the
answering machine's microphone function. This means you can monitor
sounds in the room where the answering machine is situated for up to 30
seconds.
Remotely Activate Answering Machine
If you forget to switch on your answering machine on going out, you can
switch it on remotely via another telephone.
Dial your telephone number from the remote telephone and let it ring.
After approximately 10 rings, the machine will answer and emit a long
Enter the remote code, printed on the base of the unit. If the code is
accepted, you will hear two short beeps
9#.
Press
You will hear two beeps. This confirms that the
answering machine is now on.
Hang up your telephone
Out of Memory
The total capacity of the answering machine's memory is approximately 14
minutes. The memory space is shared between the outgoing message,
personal memos, and regular incoming messages. When the memory is
full the display will show FL. The answering machine will answer after
10 rings to allow remote playback and deletion of messages, no new
messages will be accepted until the existing messages have been played
and erased.
tone
21
TROUBLESHOOTING
No display
•
Make sure that the power adaptor is plugged in correctly and is not
damaged
CL210A does not ring
•
Make sure that the telephone line cord is plugged in correctly and
is not damaged
•
Connect another telephone to the telephone PTT socket or move
your telephone to another socket to track if the failure is coming
from your telephone or your PTT socket
•
There may be too many communication devices connected to a
single telephone line e.g. another telephone, modem or facsimile
machine. Contact your network provider for help in calculating the
limit for your home or business line
•
Check the ringer Volume setting is not switched to OFF
No dial tone
•
Make sure that the telephone line cord is plugged in correctly and
is not damaged
•
Connect another telephone to the telephone PTT socket or move
your telephone to another socket to track if the failure is coming
from your telephone or your PTT socket
•
There may be too many communication devices connected to a
single telephone line e.g. another telephone, modem or facsimile
machine. Contact your network provider for help in calculating the
limit for your home or business line
No response on LCD display
•
Check for a power cut in the area.
24
Advertisement
Table of Contents
