Table of Contents
Advertisement
4–30
Bosch Rexroth AG
Servodyn-D frequency inverter displays
Read
Unit Description
from
DSS
A00 A-0-1000
Hz
Actual output frequency
f
A01 A-0-1001
Hz
Commanded output fre-
quency f
A02 A-0-1002
A
Total current
A03 A-0-1003
A
Active current
A04 A-0-1004
A
Reactive current
A05 A-0-1005
V
Motor voltage
A06 A-0-1006
V
DC link voltage
A07 A-0-1007 kVA Total power
A08 A-0-1008 kW Shaft output
A09 A-0-1009
%
Utilization
A10 A-0-1010
Heat sink temperature
_C
A11
A-0-1011
A
Present current limit
A12 A-0-1012
TEMP warning
A13 A-0-1013
Last error after
STA shut-off
A14 A-0-1014
Software version
A15 A-0-1015
Software index
Electric Drives
and Controls
act
set
U00
U01
U02
U03
Current motor frequency
Specified output frequency
rms value of the total current
rms value of active current
rms value of reactive current
rms value of current motor voltage
Current value of DC link voltage
(display = 350 V for voltage values x 350 V)
Current total power
Current mechanical shaft output of the motor
Current utilization of the motor,
for f < f
with reference to the motor torque M
N
for f > f
with reference to the motor power P
N
Accuracy:
depends on the motor,
for n > 0.1 n
N
Current heat sink temperature.
With increased heat sink temperature: Warning 'U01',
TEMP relay is opened.
The presently effective current limit is set depending on the
selected settings and the current heat sink temperature.
Warning message when TEMP relay has switched off:
no warning
excessive heat sink temperature
Excessive motor temperature.
Only if bimetal function is active P43 – P45.
Excessive heat sink and motor temperature
After restart, the last error present before STA was deacti-
vated is displayed.
Number left of point = software status
Number right of point = software scope.
Please indicate this data in the event of enquiries.
Version index of operating software,
always specify in enquiries.
Servodyn-D 1070 066 032 / 03
N
N
approx. 5% of the final value
Hide quick links:
Advertisement
Table of Contents
