Bosch Rexroth Servodyn-D Series Maintenance Manuallines page 50

1070 066 032 / 03 Servodyn-D
VMA..KR, VMA..B,C,D,F and DM/DS error displays
F code Error Meaning
display number
F70 2362 Flash rating plate: Parameter set 2: Distance between reference marks = 0
2363 Flash rating plate: Parameter set 2: Thrust constant value 1 = 0
2364 Flash rating plate: Parameter set 2: EMF constant = 0
2365 Flash rating plate: Parameter set 2: Series inductance = 0
2366 Flash rating plate: Parameter set 2: Shunt inductance = 0
2367 Flash rating plate: Parameter set 2: Leakage inductance primary winding = 0
2368 Flash rating plate: Parameter set 2: Leakage inductance secondary winding = 0
2369 Flash rating plate: Parameter set 2: Second. resistance = 0
F71 0 Inverter-Initialization error – Detailed fault documentation unavailable at this
F72 0 Configuration error; Motor / module combination not functional
F91 0 Personality error; Check proper seating of PM; Replace module
F92 0 I2C-Bus runtime error; Defective module
F95 0 I-controller synchronization error; Defective module
F96 0 Speed controller, plausibility error – Detailed fault documentation unavailable
2 Drive blocked in negative direction
3 Too little current –> Performance interruption
4 Motor overspeed –> Reverse acceleration
5 Too little current –> Performance interruption
8 Timeout torque limitation
18 Drive blocked in positive direction
19 Too little current –> Performance interruption
20 Motor overspeed –> Reverse acceleration
21 Too little current –> Performance interruption
128 Speed controller synchronization error
F97 0 VM shutdown due to FGZ shutdown
F98 0 ASTS shutdown
Electric Drives Bosch Rexroth AG
and Controls
4–27