Bosch Rexroth Servodyn-D Series Maintenance Manuallines page 38

1070 066 032 / 03 Servodyn-D
VMA..KR, VMA..B,C,D,F and DM/DS error displays
F code Error Meaning
display number
F13 0 Excessive system deviation; Drive is unable to follow defined nominal value
1 Monitoring error dual encoder
2 Excessive system deviation spindle
F14 0 Positioning threshold exceeded;
F15 0 Software speed monitoring: Overspeed in Standard mode
3 Software speed monitoring: Overspeed in Setup mode
5 Software speed monitoring: Overspeed in zero-speed monitoring
F16 0 Hardware speed monitoring: Overspeed in Standard mode
3 Hardware speed monitoring: Overspeed in Setup mode
5 Hardware speed monitoring: Overspeed in zero-speed monitoring
F30 0 Overvoltage in DC link; DC link voltage > 670 V
F35 0 Power supply fault
F36 0 Faulty external 24 VDC power; 24 V module power outside of permissible range
F46 0 RSU channel error – detailed fault documentation unavailable at this time
16 RSU: Hardware speed monitoring in Standard mode
17 RSU: Hardware speed monitoring in non-standard operation
32 RSU: Software speed monitoring in Standard mode
33 RSU: Software speed monitoring in non-standard operation
64 RSU: Channel error timeout expired in Standard mode
65 RSU: Channel error timeout expired in non-standard mode
128 RSU: Maximum dead-man interval expired in Standard mode
129 RSU: Maximum dead-man interval expired in non-standard mode
2048 RSU: Data comparison error in Standard mode
2049 RSU: Data comparison error in non-standard mode
4096 RSU: Data error, sensor calibration in Standard mode
4097 RSU: Error: Data & sensor calibration in non-standard mode
6144 RSU: Error: Data & sensor calibration in Standard mode
6145 RSU: Data error, sensor calibration in non-standard mode
8192 RSU: Error, high-level lockout in Standard mode
8193 RSU: Error, high-level lockout in non-standard mode
8432 RSU: Error, Program process monitoring in Standard mode
8433 RSU: Error, high-level lockout in non-standard mode
F60 0 I2C-Initialization error – Detailed fault documentation unavailable at this time
F61 0 ADC-Initialization error – Detailed fault documentation unavailable at this time
F62 0 PWM – Initialization error; Defective module
F63 0 Initialization error – SERCOS tables
F64 0 Overcurrent – Initialization error; Defective module
Electric Drives Bosch Rexroth AG
and Controls
4–15