Bosch Rexroth Servodyn-D Series Maintenance Manuallines page 15

1–10 Bosch Rexroth AG
Safety Instructions
Release
Trademarks
Electric Drives
and Controls
The present manual applies to the following releases:
.
DM/DS software:
VM software:
D The current software release number can be viewed by selecting
parameter S-0-0030 with the DSS-D Commissioning and Service
System, or in the "Software" field of the module configuration display
(DIAGNOSTICS " MODULE CONFIGURATION).
D For information concerning the current DSS software release, refer to
HELP " ABOUT...
D The current software release of VMA..KR and VMA..B,C,D,F can
only be read from the 7-segment display during test operation. For
this purpose, turn dip switch "T" on the VM's personality module "on":
The following appears in a running, flashing display:
"Cxx.ZZ.ddmmyyyy"
Where: xx
ZZ
dd
mm = software creation month
yyyy = software creation year
All trademarks of software installed on Rexroth products upon delivery
are the property of the respective manufacturer.
Upon delivery, all installed software is copyright-protected. The software
may only be reproduced with the approval of Rexroth or in accordance
with the license agreement of the respective manufacturer.
MS-DOSr and Windowst are registered trademarks of Microsoft
Corporation.
PROFIBUSr is a registered trademark of the PROFIBUS Nutzerorgani-
sation e.V. (user organization).
SERCOS interfacet is a registered trademark of Interessengemeins-
chaft SERCOS interface e.V. (Joint VDW/ZVEI Working Committee).
Servodyn-D 1070 066 032 / 03
SERCOS interface
CANopen/rho
Analog interface
PROFIBUS-DP
Motion Control
V0.045 or higher
= software release number
= (internal)
= software creation day
V0.049 or higher
V0.002 or higher
V0.17 or higher
V0.004 or higher
V0.010 or higher