Performing A Self Test; Switching On The Door Assistant - Miele KWT 2671 ViS Operating And Installation Instructions

Selecting additional settings
Performing a Self test 
Perform a Self test
that your wine conditioning unit is not
working properly and want to check if it
is suffering from any problems.
 In Settings mode , use the 
and  sensor controls to select
and select OK to confirm your se-
test
lection.
 Touch the  sensor control if you
wish to terminate the process.
The starts and the wine condi-
Self test
tioning unit is checked for any faults or
malfunctions.
– The message System restart
pear on the display if the self test
does not discover any faults or mal-
functions.
– If the self test does discover any
faults or malfunctions, they are indic-
ated as error messages on the dis-
play.
An alarm will also sound.
 If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the  sensor control.
 Make a note of the error message(s)
displayed.
 Contact the Customer Service De-
partment and inform them of the error
message(s) on the display.
 Confirm the message with OK.
System restart will appear on the display.
The wine conditioning unit briefly
switches off and then back on automat-
ically.
62
if you are concerned
Self
will ap-
Self test completed
play.
 Confirm the message with OK.
The main screen will appear on the dis-
play again.
Switching on the Door assist-
ant 
You can choose between the two door
assistants: Push2open
The default door assistant is
The Push2open door assistant is suitable
for furniture fronts without handles. The
door opens automatically when you
gently press against it.
The Pull2open door assistant is suitable
for furniture fronts with handles. The ap-
pliance door can be opened easily with
little force.

Risk of damage if the appliance
door is closed prematurely.
When the door assistant is switched
on, repeatedly closing the appliance
door early can lead to damage or
malfunctions.
Refrain from holding onto or closing
the appliance door while automatic
door opening is still extended. How-
ever, if you have closed the appli-
ance door, leave it closed for
5 minutes. Automatic door opening
resets itself.
will appear on the dis-
and Pull2open
Push2open
.
.