Performing A Self Test; Switching On The Door Assistant - Miele KWT 2601 VI Operating And Installation Instructions

Selecting additional settings
Performing a Self Test 
Perform a Self Test
that your wine conditioning unit is not
working properly and want to check if it
is suffering from any problems.
 In Settings mode , use the  and
 sensor controls to select the
and select OK to confirm your
Test
selection.
 Touch the sensor control  if you
wish to terminate the process.
The starts and the wine condi-
Self Test
tioning unit is checked for any faults or
malfunctions.
– The message System restart
in the display if the Self Test does not
discover any faults or malfunctions.
– If the Self Test does discover any
faults or malfunctions, they are indi-
cated as error messages in the dis-
play.
An alarm will also sound.
 If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the  sensor control.
 Make a note of the error message(s)
displayed.
 Contact Miele Technical Service and
inform them of the error message(s)
on the display.
 Confirm the message with OK.
will appear on the display.
System restart
The wine conditioning unit briefly
switches off and then back on automat-
ically.
64
if you are concerned
Self
appears
Self test completed
play.
 Confirm the message with OK.
The main screen appears in the display
again.
Switching on the Door Assis-
tant 
You can choose between the two Door
Assistants Push2Open
The default Door Assistant is
Push2Open .
The Door Assistant is suit-
Push2Open
able for cabinet fronts without handles.
The door will then open automatically
when you gently press against it.
The Pull2Open Door Assistant is suitable
for cabinet fronts with handles. The ap-
pliance door can be opened easily with
little force.

Risk of damage if the appliance
door is closed prematurely.
When the Door Assistant is switched
on, repeatedly closing the appliance
door early can lead to damage or
malfunctions.
Refrain from holding onto or closing
the appliance door while automatic
door opening is still extended. If you
have indeed closed the appliance
door, leave it closed for 5 minutes.
Automatic door opening resets itself.
will appear on the dis-
and Pull2Open .