Initial Commissioning; Before Using For The First Time; Choosing The Right Door Assistant (Push2Open/Pull2Open) - Miele KWT 2671 ViS Operating And Installation Instructions

Before using for the first time

Allow the wine conditioning unit to
stand for approx. 1 hour before con-
necting it to the power supply.
This will prevent potential functional
problems with the wine conditioning
unit.
Packaging material
 Remove all packaging material from
the inside of the appliance.
Always remove all packaging mater-
ial, including adhesive tape, before
switching on the wine conditioning
unit. The adhesive tape is difficult to
remove from cold surfaces.
Cleaning the wine unit
Please refer to the relevant instruc-
tions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.

Initial commissioning

Choosing the right door assistant
(Push2open/Pull2open)
The door assistant helps you to open
the appliance door.
You can choose between the two door
assistants Push2open
"Switching Door assistant
lecting additional settings").
The default door assistant is
 Select the
Pull2open door assistant if your wine
conditioning unit has a furniture front
with a handle.
 Select the
Push2open door assistant if your wine
conditioning unit has a handle-free
furniture front.
Using the SommelierSet
 "The SommelierSet" describes how
to use the SommelierSet.
and Pull2open (see
 on" in "Se-
Push2open
57
.