Table of Contents
Advertisement
7. Advanced operations
Image 7-15
4 corner adjustment
How to adjust the image?
1. In the main menu, select Installation → Warp.
Image 7-16
Installation menu, Warp
2. In the Warp menu, select 4Corners.
Image 7-17
Warp menu, 4Corners
The 4Corners menu is displayed.
Image 7-18
4Corners Warping
3. To enable warping, make sure the Warp slider is set to On.
The slider is enabled when set to the right and when it is colored blue.
4. To set warping on one or more of the four corners, select one of the four corners.
5. Set the desired X and Y coordinates for this corner, using the arrow keys.
Tip:
A red border corner will be projected along with the current image. The border is a visual aid, showing the result of the
warped corners.
6. Repeat from step 4 for each corner, until all corners are warped in the desired position.
44
R5906102 WODAN 15/02/2017
Advertisement
Table of Contents
