Setting Image Levels Manually - Barco Wodan User Manual

6. Basic operations
Image 6-3
Select Source
2. Press ENTER.
The Select Source menu is displayed with the actual available sources filled out.
3. Scroll down to the bottom of the list and select Connector Settings.
Image 6-4
The available sources are displayed.
Image 6-5
Select source
4. Select the desired connector.
The Connector Settings menu for this connector will be displayed. All default values are Auto.
Image 6-6
5. To apply a limit on the used color space, select one of the other values in Color space.
6. To apply a limit on the used signal range, select one of the other ranges in Signal Range.
6.3

Setting image levels manually

Purpose
Contrast: Change the contrast of the complete output signal (main and PiP window together) of the projected image.
34 R5906102 WODAN 15/02/2017