4. PHYSICAL INSTALLATION
Installation process
1.
Installation of the support structure and mounting plates (page 22).
2.
Installation of the SLite tiles (page 24).
3.
Cabling of the SLite tiles.
a) Power cabling (page 28).
b) Data cabling (page 30).
4.
Installation of the power box(es). See installation manual of used power boxes.
5.
Installation of the digitizer and, if required, the fiberlink system and/or AEC. See installation manual of used peripherals.
6.
Installation of the control software. See manual of the control software.
7.
Energize the SLite display and start up of the control software.
R5976575 FIXED SLITE DISPLAY 08/03/2006
4. Physical installation
21