Table of Contents
Advertisement
5. CABLING OF AN SLITE DISPLAY
Outdoor plugs and sockets for SLite tiles
Barco uses special designed outdoor sockets for power and data connections from tile to tile and to other peripherals. These rugged
sockets are watertight (IP65) when used with the appropriate plugs and sealing rings. Each socket is equipped with a plug holder
clamp which, when locked, ensures the plug is completely pressed into the socket.
A
B
Image 5-1
A
Power output port.
B
Power input port.
C
Data output port.
D
Data input port.
E
Plug holder clamp.
W
ARNING
outdoor cables for LED-walls. Do not use any other cables than those specified.
W
ARNING
plug holder clamps must be locked firmly.
W
ARNING
and data cables. Use the correct sealing ring for the corresponding socket. Black colored ring (B361243, left
image) for power, red (B361595, right image) for data. Replace damaged sealing rings immediately.
R5976575 FIXED SLITE DISPLAY 08/03/2006
C
D
:
The outdoor input and output sockets for SLite tiles can only be used in conjunction with Barco's
:
Dummy plugs must be placed on unused outdoor input and output sockets of SLite tiles and all
:
Be sure that the connector sockets are provided with sealing rings before plugging in the power
E
5. Cabling of an SLite display
27
Advertisement
Table of Contents
