Honeywell Sensepoint XCD RFD Technical Handbook page 40

Sensepoint XCD RFD Technical Manual
Relay Operation
Set Location
Set Temperature Unit
Check Alarm functions
Set ID
Quit
Table 11: Transmitter menu descriptions
40
SPXCDHMRFEN Issue 4_08-2016
Configure relay on delay time, relay off
delay time and latch/non-latch
Set location (or TAG number)
Change temperature display unit.
°C (Celsius) or °F (Fahrenheit)
Simulate alarm situation to check the alarm
system without gas present at the sensor
®
Change Modbus slave ID, baud and parity
®
bit setting (Modbus
Return to Monitoring mode
version only)