Before Use - aidapt VR165 Fixing And Maintenance Instructions

INTRODUCTION
Thank you for choosing to purchase the Linton Lift-Assist Mobile Commode from
Aidapt. If used in accordance with the user instructions, they should give you many
years of continuous service.
NB. This equipment must be installed by a competent person and a risk
assessment may be needed as to the suitability of the commode for the
particular user. Although it is recommended that the commode will be used with
supervision, there may be instances where, following a risk assessment, a client
may use the commode independently.
Weight Limit: 190 kg (30 stone)
Do not exceed the weight limit stated – doing so could put the user at risk.

BEFORE USE


Carefully remove all packaging. Avoid using any knives or other sharp
instruments as this may damage the surface of the product.

Check the product for any visible damage If you see any damage or suspect a
fault, do not use your product as it may compromise the safety of the user, but
contact your supplier for support.

Any damage to the Lift assist electric actuators/battery pack or charger on
arrival or during use should be reported immediately and the commode
removed from use until repaired.
ASSEMBLY
The package (VR165) contains the following components:
1. The main frame with four brake castors and raise actuators
attached
2. White commode plastic
aperture seat (attached
to the main frame)
3. Grey commode seat
cover
4. Detachable back
5. One pair of Footrests
6. Battery Power supply
7. Two channel handset
8. Battery charger
9. Removable bucket
Fixing and Maintenance Instructions
7
1
6
2
4
3
2
5
Ver. 1 10/2013 (2668)
8
9