Before Use; Intended Use - aidapt VG823D Usage And Maintenance Instructions

INTRODUCTION
Thank you for deciding to purchase the Grip-on Chair Raisers from Aidapt. The Grip-
on Chair Raisers are manufactured from the finest materials available. When used
correctly they are designed to give many years of reliable, trouble-free service.
NB. This equipment must be installed by a competent person.
VG823D
VG823F
VG823H
Maximum User Weight: 500 kg (78 stone) including furniture.
Do not exceed the weight limit stated – doing so could put the user at risk.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

Grip-on Chair Raisers are suitable for use with furniture on castors or legs.
The Grip-on Chair Raisers grip onto the furniture using the unique 'donut'. This
greatly increases safety as the furniture raiser is attached to the furniture rather
than the furniture simply sitting on the raiser, as with some other models.
No additional fixing is required due to the gripping nature of the 'donut' in each
Chair Raiser.
Raisers are supplied in a set of 4.
To raise 25 mm (1") one set is required, 2 sets are required to raise 50 mm (2") and 3
sets are required to raise 75 mm (3").
Available to fit several widths of castors/legs.
Usage and Maintenance Instructions
Max. Diameter: 32 mm (1 1/4")
Max. Diameter: 45 mm (1 3/4")
Max. Diameter: 58 mm (2 1/4")
2
Ver. 2 07/2012 (2098)