Introduction; Before Use - aidapt VY428 Assembly And Operating Instructions Manual

INTRODUCTION

The Solo Bed Transfer Aid can be fitted to single, double, queen and king size beds.
The Solo Bed Transfer Aid is not designed to prevent users falling from their bed.
PLEASE NOTE: VY428/VY428N IS THE SOLO BED TRANSFER AID WITHOUT STRAP
NB. This equipment must be installed by a competent person and a risk
assessment undertaken as to the suitability of the Bed Transfer Aid for the
particular user and user's bed. We would refer customers to 'Bed Rail Risk
Management' LAC Number 79/8 published by the HSE.
VY428/VY438 .....................................................................127 kg (20 st.) weight limit
VY428N/VY438N ................................................................159 kg (25 st.) weight limit
Note: Do not exceed the weight limit stated – doing so could put the user at risk.

BEFORE USE

• Carefully remove all packaging. Avoid using any knives or other sharp instruments as this
may damage the surface of the product.
• Check the product for any visible damage If you see any damage or suspect a fault, do not
use your product as it may compromise your safety, but contact your supplier for support.
Net Weight (kg) ....................................................... 3.16.............................................................................. 3.30
Gross Weight (kg) ................................................... 3.66.............................................................................. 3.80
VY428/VY428N VY438/VY438N