INTRODUCTION Thank you for choosing to purchase the Linton Lift-Assist Mobile Commode from Aidapt. If used in accordance with the user instructions, they should give you many years of continuous service. NB. This equipment must be installed by a competent person and a risk assessment may be needed as to the suitability of the commode for the particular user.
Page 3
Please read the following installation instructions carefully: Remove all contents from the box and place the assembled base on a level floor. At the rear of the commode you will see two black threaded wheel nuts; undo the wheel nuts so that the locking holes are clear (Fig. 1). Place the two back legs into the locating holes on the back edge of the commode frame (Fig.
Page 4
USE OF THE COMMODE Please read and understand the following cautions regarding the usage of the commode. If it is necessary to lift the commode, place your hands on the tubular metal frame beneath the blow moulded seat. With all riser chairs or commodes consider any risk that the mechanism may trap a part of the user’s body, his/her clothes, or items such as walking sticks.
Page 5
COMPOSITION The frame is made from chromium-plated mild steel. You must not, under any circumstances, use any abrasive cleaners or cleaners which attack chromium plating. CLEANING A useful guide to decontamination is MHRA leaflet DB2003(06). Do not use abrasive cleaners as this could damage the surface of the equipment. For cleaning, wipe with a clean cloth soaked in detergent solution and wring out.
The information given in this instruction booklet must not be taken as forming part of or establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the information is given.
Need help?
Do you have a question about the VR165 and is the answer not in the manual?
Questions and answers