Advertisement
LOGIX SERIES CONTROLLERS
The Logix Series will operate on both the 255 and Performa valve body series.
INITIAL POWER-UP
SU MO TU
WE TH FR SA DAYS
Time & Day
Regen Time & Day
Salt
Capacity
Hardness
INITIAL START-UP STEP-BY-STEP INSTRUCTIONS
SU MO TU
WE TH FR SA DAYS
Time & Day
Regen Time & Day
Salt
Capacity
Hardness
SU MO TU
WE TH FR SA DAYS
Time & Day
Regen Time & Day
Salt
Capacity
Hardness
LOGIX™ SERIES INSTALLER QUICK-START SHEET
740 Controller - Electronic time clock control capable of doing 7-day (day of
week) regeneration, or up to a 99 interval day regeneration. This control will
operate both in a conditioner (softener) or 3-cycle filter mode with the same
controller.
760 Controller - Electronic metered-demand (volumetric) controller which
regenerates based on the water usage of the installation site. A calendar
override is a standard feature on this controller.
LCD Display
DOWN Button
Initial Power Up - (CAMSHAFT proceeds to HOME position)
•
At initial power-up, the camshaft will need to rotate to the HOME
(in service) position.
•
Camshaft may take 1-2 minutes to return to home position.
•
Err 3 will be displayed until the camshaft returns to home.
•
If more than 2 minutes elapses, verify that the motor is turning the
camshaft. If it is not turning, see the troubleshooting section in Dealer
Installation and Service Manual.
Step 1: Program System Size
This step may have been performed by your system's OEM manufacturer. In
this case, proceed to step 2
•
Input tank diameter size in inch (7-8-9-10-11-12-13-14-16).
•
Use UP and DOWN buttons to scroll diameter choices.
•
"11" value corresponds to 10x44 and 10x54 tank sizes.
•
To choose a 3-cycle filter operation - press DOWN until an "F" is displayed.
•
Press SET to accept the system size you've selected.
•
If incorrect setting is programmed, see "Resetting the Control" section
below.
.
SU MO TU
WE TH FR SA DAYS
Time & Day
Regen Time & Day
PM
Salt
MIN
LBS
x2
KG
Capacity
C
P
x100
H
Hardness
SET Button
UP Button
Manual Regeneration
1
Advertisement
