GE Logix 740C-ET Quick Start Manual page 4

SU MO TU WE TH FR SA DAYS
Time & Day
Regen Time & Day
Salt
Capacity
Hardness
Example: To move the cursor and select/deactivate a day
1. The cursor should be fixed. If is flashing, press SET.
2. Use UP and DOWN buttons to put the cursor under the day to change.
3. Press SET button. The cursor will flash.
4. Use UP and DOWN buttons to activate the flag for the desired day.
5. Press SET to move the cursor to the following day. The cursor will be fixed.
When the cursor will be under S (Saturday) and will flashing, press SET and the week
days programming will be completed. The menu will move up to the salt amount
c hoice.
To return to regeneration frequency, the days selected for the regeneration have to be
deactivated. The values related to the days between two following regenerations could be
not equal to zero.
Step 5b: Set Calendar Override (760 Demand Control Only)
• If using 740 control - proceed to step 6.
• Set number of days for calendar override on demand control
• "0" days is the default for calendar override.
• Days can be adjusted from 1/2 (0.5) to 99 days.
• To change, press SET to make the "0" flash.
• Use the UP and DOWN buttons to change to the number of days desired.
• Press SET to accept the regeneration frequency and to advance to the next cycle.
3