Changing The Home City Summer Time Setting; Checking The Watch Charge Level; Connection; Connecting With A Phone - Casio 5608 Operation Manual

Changing the Home City
Summer Time Setting
1.
Y Tap the "G-SHOCK Connected" icon.
2.
X Hold down (C) for at least 1.5 seconds
until [CONNECT] starts to flash.
When a connection is established
between the watch and phone,
[CONNECT] will stop flashing and the
second hand will move from [R] to e .
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3.
Y Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with G-SHOCK Connected.
1.
Y Tap the "G-SHOCK Connected" icon.
2.
X Hold down (C) for at least 1.5 seconds
until [CONNECT] starts to flash.
When a connection is established
between the watch and phone,
[CONNECT] will stop flashing and the
second hand will move from [R] to e .
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3.
Y Use G-SHOCK Connected to check the
charge level.
Operation Guide 5608

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
C Pair the watch with a phone.
l
1.
Move the phone close to (within one meter
of) the watch.
2.
X Hold down (C) for at least 1.5 seconds
until [CONNECT] starts to flash.
When a connection is established
Connected
between the watch and phone,
[CONNECT] will stop flashing and the
second hand will move from [R] to e .
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
Important!
If you have problems establishing a
●
connection, it could mean that G-
SHOCK Connected is not running on
the phone. On the phone's Home
Screen, tap the "G-SHOCK
Connected" icon. After the app starts
up, hold down the watch's (C) button
for at least 1.5 seconds.
Note
The connection will be terminated if
●
Connected
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with G-
SHOCK Connected: "Watch settings"
n "Connection time". Next, select a
setting of 3 minutes, 5 minutes, or 10
minutes.

Disconnecting from a Phone

Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
Connected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where connection with
a phone may cause problems, you can
perform the procedure below to disable auto
time adjustment. To re-enable auto time
adjustment, perform the same operation
again.
This operation is not required if the watch is
●
not paired with a phone.
1.
Y Tap the "G-SHOCK Connected" icon.
2.
Connected
X Hold down (C) for at least 1.5 seconds
until [CONNECT] starts to flash.
When a connection is established
between the watch and phone,
[CONNECT] will stop flashing and the
second hand will move from [R] to e .
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
3.
Y Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Disconnected
Connected
9