Table of Contents
Advertisement
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch's other settings.
Note
This function is available only while G-
●
SHOCK Connected is running on the
phone.
This section describes watch and
●
phone operations.
X : Watch operation
Y : Phone operation
Getting Ready
A Install the required app on your
phone.
In Google Play or the App Store, search for the
CASIO "G-SHOCK Connected" app and
install it on your phone.
B Configure Bluetooth settings.
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
C Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y Tap the "G-SHOCK Connected" icon.
Operation Guide 5608
3.
Y Perform the operation shown on the
phone screen to be paired with.
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
When pairing starts, the second hand
●
will point to [R]. When pairing is
complete, the second hand will move to
e .
Pairing started.
Auto Time Adjustment
Your watch will connect with a phone at preset
times each day and adjust its time settings
automatically.
Using Auto Adjust
●
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Important!
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
While the watch is too far away from
ー
its paired phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
Note
If the watch does not indicate the
●
correct time even if is able to connect
with a phone, correct the hand and
date indicator positions.
l
If there is a World Time City specified
●
with G-SHOCK Connected, its time will
also be adjusted automatically.
The watch will connect with the phone
●
Pairing complete.
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
The watch cannot connect with a
●
phone for time adjustment while a
stopwatch measurement or timer
operation is in progress.
Triggering Immediate Time Adjustment
●
The watch's time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to adjust the watch's time
setting based on your phone's time, perform
the procedure below to connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2.
X Press (C).
[SET] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] will appear, and then the
watch will adjust its time setting based on
information from the phone.
Trying to connect
Note
You can perform the above operation
●
for time adjustment from any watch
mode.
The connection is terminated
●
automatically after time adjustment is
complete.
If time adjustment fails for some
●
reason, [ERR] will appear.
Adjusting Hand Alignment
Following time
adjustment
6
Hide quick links:
Advertisement
Table of Contents
