Replacing The Processor Heat-Sink; Procedure; Post-Requisites - Dell Inspiron 3662 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your
skin can reduce the heat transfer capability of the thermal grease.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Place the processor heat sink over the processor.
2. Align the captive screws on the heat sink with the screw holes on the system board.
3. In sequential order (as indicated on the heat sink), tighten the captive screws that secure the heat sink to the system board.
Post-requisites
1. Replace the processor fan.
2. Replace the front bezel.
3. Replace the computer cover.

Replacing the processor heat-sink

computer. After working inside your computer, follow the instructions in
Replacing the processor heat-sink
29
After
45