Removing The Processor Heat-Sink; Prerequisites; Procedure - Dell Inspiron 3662 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your
skin can reduce the heat transfer capability of the thermal grease.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the computer cover.
2. Remove the front bezel.
3. Remove the processor fan.
Procedure
1. In sequential order (as indicated on the heat sink), loosen the captive screws that secure the heat sink to the system board.
2. Lift the processor heat sink off system board.
44

Removing the processor heat-sink

Removing the processor heat-sink
computer. After working inside your computer, follow the instructions in
28
After