Removing The Front I/O-Panel; Prerequisites; Procedure - Dell Inspiron 3662 Service Manual

Hide thumbs Also See for Inspiron 3662:
Table of Contents

Advertisement

NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:

Prerequisites

Procedure

Prerequisites
1. Remove the
computer
cover.
2. Remove the
front
bezel.
Procedure
1. Place the computer with the side-chassis facing up.
2. Lift and rotate the side-chassis away from the computer.
3. Disconnect the I/O-board cable from the I/O board.
4. Remove the two screws (#6–32 UNC 1/4'') that secure the I/O board to the chassis.
5. Lift the I/O board off the chassis.
46

Removing the front I/O-panel

Removing the front I/O-panel
computer. After working inside your computer, follow the instructions in
30
After

Advertisement

Table of Contents
loading

Table of Contents