NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw holes on the processor fan with the screw holes on the heat sink.
2. Replace the four screws (M6xL10) that secure the processor fan to the heat sink.
3. Connect the processor-fan cable to the system board.
4. Rotate the side-chassis towards the computer until it snaps into place.
Post-requisites
1. Replace the
front
bezel.
2. Replace the
computer
cover.
Replacing the processor fan
computer. After working inside your computer, follow the instructions in
Replacing the processor fan
27
After
43