Table 3-13 3260A Series Over Current Protection Setting Value; Table 3-14 3260A Series Over Power Protection Setting Value - Prodigit 3260A Series Operation Manual

PRODIGIT
3.10.3 Over Power
The protection point of over power protection (O.P.P.) is preset in the 3260A series
High Power electronic load. The setting values of over power protection are shown
table 3-14. When O.P.P. occurs, the 4 1/2 digit monitor on the lower side of the front
panel of 3260A series High Power electronic load will display〝oPP〞with flickering
to indicate〝Under Protection〞.Once the over power condition disappears, the lower
4 1/2 digit monitor will resume to normal condition.
3.10.4 Over Temperature
3260A Series High Power electronic load is provided with temperature sensor. When
the temperature of heat dissipater exceeds about 85 ±5 ,over temperature
protection will occur and 4 1/2 digit monitor at the lower side of the front panel of
3260A series High Power electronic load will display〝oTP〞with flickering indicates
〝Under Protection〞. Once the over temperature condition disappears, the lower 4
1/2 digit monitor will resume to normal.
Upon occurrence of over temperature protection, please check the ambient working
temperature and ventilation for normality. Please note that the air outlet on the back
of the electronic load shall be away from the wall by more than 15 cm to keep good
ventilation.
Model
3260A
32601A
3261A
32611A
32612A
32613A
32614A
32615A
32616A

Table 3-13 3260A Series over current protection setting value

Model
3260A
32601A
3261A
32611A
32612A
32613A
32614A
32615A
32616A

Table 3-14 3260A Series over power protection setting value

3260A Series Operation Manual 35
O.C.P.
12.6 A
25.2 A
18.9 A
37.8 A
56.7 A
75.6 A
94.5 A
113.4 A
132.3 A
O.P.P.
1260 VA
2520 VA
1890 VA
3780 VA
5670 VA
7560 VA
9450 VA
11340 VA
13230 VA
℃ ℃