Bluetooth Connection - PDMOVIE Live Air 2 Manual

2. Turn on the Bluetooth controller and motor
Press the ON/OFF button on the Bluetooth controller for three
seconds until the indicator light powers on. The motor will turn on
automatically when the battery is inserted.

3. Bluetooth Connection

After the Bluetooth controller is turned on, the indicator lights
will flash quickly for 60 seconds, which means the Bluetooth is
searching. When the Bluetooth connection is successful, the
controller indicator light will brighten all the time.
*1.The recommended control distance of the controller is about 100 meters,
although the actual control distance can be affected by environmental factors.
2.The motor and the controller will disconnect when the signal is weak. After the
signal returns to normal, the motor and controller will automatically reconnect.
4. Calibration
(1) Press the ON/OFF button of the Bluetooth controller
once, then press it again and hold until the motor rotates.
(2) Press and hold the button on the bottom of the motor for
three seconds until the motor rotates.
(1) Press the button once,
then press it again for three
seconds.
Bluetooth
controller
Plug in the
Press the ON/OFF button.
battery.
Light
Searching Bluetooth
Blinking fast
(2) Press the button
for three seconds.
Light
Connect successful
Blinking
Motor