Servicing The Air Cleaner - Toro TITAN HD 2000 Series Operator's Manual

4. Lift the cover and rotate the air-cleaner assembly
out of the engine
5. Separate the foam and paper elements
69).
Servicing the Foam Element
1. Wash the foam element in liquid soap and
warm water. When the element is clean, rinse
it thoroughly.
2. Dry the element by squeezing it in a clean cloth.
Important:
Replace the foam element if it
is torn or worn.
(Figure 68).
Figure 68
Figure 69
Servicing the Paper Element
1. Gently tap the paper element to dislodge dirt.
Note:
pressurized air, as this will damage the element.
Note:
element. Handle the new element carefully;
do not use if the sealing surfaces are bent or
damaged.
2. Clean the air-cleaner base as required, and
check the condition.
Installing the Air Cleaner
g027800
1. Install the foam element over the paper element.
Note:
elements.
2. Align the holes of the filter into the manifold
ports.
3. Rotate the filter down into the chamber and fully
seat it against the manifold
g027801
(Figure
4. Close the cover.
g027802

Servicing the Air Cleaner

Engines with a Heavy-Duty Air Cleaner
Service Interval: Every 250 hours—For Toro
Note:
Service the air cleaner more frequently if
operating conditions are extremely dusty or sandy.
55
Do not wash the paper element or use
Replace a dirty, bent, or damaged
Ensure that you do not damage the
(Figure
Figure 70
engines with a heavy-duty air
cleaner—replace the air filter (more
often in dirty or dusty conditions).
70).
g228022