CL3108 / CL3116 User Manual
Firmware Upgrade Recovery
There are three conditions that call for firmware upgrade recovery:
When a firmware upgrade is manually aborted.
When the mainboard firmware upgrade fails.
When the I/O firmware upgrade fails.
To perform a firmware upgrade recovery, do the following:
1. Power off the CL3108 / CL3116.
2. Connect the Firmware Upgrade Cable to its Firmware Upgrade Port.
3. Slide the Firmware Upgrade Recovery Switch to the Recover position.
4. Power the CL3108 / CL3116 back on and repeat the upgrade procedure.
5. After the CL3108 / CL3116 has been successfully upgraded, power it off,
and slide the Firmware Upgrade Recovery Switch back to the Normal
position.
6. If the CL3108 / CL3116 is one of the cascaded switches, plug it back into
the installation.
7. Power the CL3108 / CL3116 back on.
56