Fitting The Helmet Mount - Silvercrest SAK 4000 A1 Operation And Safety Notes

Make sure that the waterproof case
in particular that the seal is clean and undamaged.
Insert the product and make sure that the lens
the lens opening.
Re-seal the waterproof case
clip in the lid and carefully turning the other part of the lock-
58
ing clip
58

Fitting the helmet mount

Note: Before fitting the helmet mount using the provided 3M adhe-
sive labels for mounting
the relevant helmet manufacturer's instructions and the safety notes.
Ensure that the use of the helmet mount and the fitting accessories is
permitted and that the protective effect of the bicycle helmet will not
be adversely affected by these.
You can use and mount the product in different ways with the acces-
sories included. For assembly examples see figure D.
Note: Clean the mounting surface with a degreasing and non-abrasive /
non-chemical detergent before you affix the helmet mount
downwards until you hear it click into place.
(e.g. on a bicycle helmet), you must read
53
is dry and clean. Ensure
59
by hooking part of the locking
59
fits exactly in
4
, .
51 52
GB/IE/NI 81