Explanation Of Button Functions; Switching The Product On And Off - Silvercrest SAK 4000 A1 Operation And Safety Notes

Explanation of button functions

Designation
On / off / mode
button
1
Shutter release /
select button
2

Switching the product on and off

Hold the on / off / mode button
turn the product on. The status LED
Also hold down the on / off / mode button
seconds to turn the product off. The status LED
then turn off.
24 GB/IE/NI
Function
- Press and hold for approx. 3 seconds to switch
the product on and off.
- Within a turned-on mode, press quickly to switch
between the different modes (see chapter
"Changing modes").
- In the settings menu, press to scroll through the
different menu options (see chapter "Config-
uring the product").
- In screensaver mode, press to end the function.
- In video mode, press to start and press again
to stop recording video.
- In photo mode, press to take a single picture.
- In the settings menu, press to confirm a setting /
selection.
- In the menu, hold down to jump back a level
in the menu.
- In screensaver mode, press to end the function.
for approx. 3 seconds to
1
will light up blue.
6
for approx. 3
1
6
will flash and