Audi A7 Sportback 2011 Fitting Instruction page 5

Load — Do not tension roof bars against each other
WARNING!
Do not tension roof bars against each other — risk of
accident!
Load — install the roof bars first, then install the add-on
components
WARNING!
Only fit the add-on components once the roof bars have
been installed on the vehicle — risk of accident!
Load — room to open boot lid
Caution!
To prevent damage to the vehicle, make sure that you open
the boot lid carefully when installing add-on components
(such as a roof box, bicycle rack etc.) and when transporting
long items. It is recommended that you adjust the opening
angle, if necessary (see Vehicle operating instructions for
this) for vehicles with automatic boot lids.
Load — room to open sliding/tilting glass sunroof
Caution!
Add-on components (such as a roof box, bicycle rack etc.)
must be securely fastened in the T groove on vehicles with a
sliding/tilting glass sunroof
When installing add-on components, check that there is
enough room above the sliding/tilting sunroof before opening
it. If the add-on components are secured using assembly
brackets, the sliding/tilting glass sunroof must not be opened
— risk of damage resulting from a collision!
⇒ page 11.
Audi A7 Sportback 2011
No. 122, Body, Edition 10.2010
B
B
2 Safety notes
6
ZUB-0220
A
ZUB-0326
ZUB-0785
ZUB-0794
3