General Notes; Setting The Roof Bar Width - Audi A7 Sportback 2011 Fitting Instruction

–
Unhook the claw fasteners -12- from the installation
position and swivel downward.
–
Turn bolt -13- approx. 10 times to screw in.
–
Close the cover flap -16- and lock the lock with the key.
4.4

General notes

Technical data
Weight of roof bar set: approx. 6 kg (13 lbs.)
Roof load/load
To determine the roof load:
Weight of the roof bars
+ Weight of the add-on component
+ The weight of the load
= Roof load
WARNING!
Never exceed
the maximum permissible roof load (90 kg/198 lbs.)
♦
the gross axle weight rating
♦
the gross vehicle weight rating
♦
of your vehicle ⇒ Vehicle owner's manual.
Maintenance instructions:
The roof bars should always be cleaned and kept in good
order. It is particularly important to remove any dirt and salt
in the winter.
4.5

Setting the roof bar width

Instructions for the qualified workshop if the position of the
support bracket for the relevant vehicle is not set correctly.
–
Install the roof bars on the vehicle
–
Use an Allen key (5 mm) to unscrew the hexagon bolts -2-
on the right-hand support bracket far enough that the sup-
port bracket can still be moved. The roof bar remains on
the vehicle roof during this process.
⇒ page 7.
4 Installing/removing roof bars on vehicle
Audi A7 Sportback 2011
No. 122, Body, Edition 10.2010
6
ZUB-0342
13