Audi A7 Sportback 2011 Fitting Instruction page 16

Audi A7 Sportback 2011
6
No. 122, Body, Edition 10.2010
–
Adjust the roof bar so that the rubber support on the
right-hand support bracket housing sits flush with the roof
edge -arrow-.
The gap -a- must not exceed 1 mm.
–
Tighten the hexagon bolts -2- to 8 Nm.
–
Repeat the procedure on the other roof bar if necessary.
WARNING!
Check that all hexagon bolts have been tightened (8 Nm). If
this guideline is not observed, this can result in the roof
bars becoming loose or falling off — risk of accident!
14
4 Installing/removing roof bars on vehicle
A
B
C
A
a
B
a
C
ZUB-0345
ZUB-0336
ZUB-0343