Audi A7 Sportback 2011 Fitting Instruction page 10

Audi A7 Sportback 2011
6
No. 122, Body, Edition 10.2010
–
...then twist out the claw fasteners -12- as far as they will
go...
–
...and hook the "lugs" of the claw fasteners into the base
bracket.
Note
When in the installation position, the claw fasteners -12- are
a clear distance from the support brackets.
Determining the installation position
The positioning bolts -X- and -Y- are located beneath the
rubber lips between the decorative trim and the roof frame.
Note
The illustration shows the car from the left-hand side.
A - approx. 25 cm
B - approx. 32 cm
•
Clean the contact area between the vehicle roof and the
roof bars thoroughly (they should be free from dust and
grease).
8
4 Installing/removing roof bars on vehicle
12
12
X
A
Y
ZUB-0797
ZUB-0538
B
ZUB-0788