Service; Battery Charging And Feedback - Parceltools C190 CubetapePRO Technical Manual

When the "replace tape" alert has been issued it is recommended to follow the
following process:
• Remove the tape cassette
• Blow out the tape sensor area and cassette recess with an air duster
• Replace the tape cassette with a new unit
Clean the device's keypad and rubber cover with a clean, soft cloth that has been dampened
with mild glass cleaner. Do not use any type of industrial solvent, such as toluene or isopropanol
(IPA) that could damage the device's finish. Do not spray cleaner directly on the device.
Regular maintenance inspections and calibration by a qualified service technician are
recommended. Care should be taken to avoid any punctures to this surface or any
vibrations or shocks to the instrument. If the front display is punctured, ensure that steps
are taken to prevent dust and moisture from entering the unit until the device can
be repaired.

5.4 Service

Only qualified personnel should perform installation, programming and service. Please
contact a local authorized Parceltools representative for assistance.
Parceltools recommends periodic preventative maintenance for the device to ensure reliability
and to maximize service life. All measurement systems should be periodically calibrated and
certified as required to meet production, industry and regulatory requirements. We can help
you maintain uptime, compliance and quality system documentation with periodic
maintenance and calibration services. Contact your local Parceltools authorized service
organization to discuss your requirements.

5.5 Battery Charging and Feedback

• The battery indicator symbol appears at the left bottom of the screen.
• The symbol displays battery in the form of percentage.
• To charge the battery, connect C190CubetapePRO to a PC or power adaptor
via the USB cable. OR place the device in the Parceltools charging cradle
• The charge light is on during the charging process.
• When charging is finished, the charge light will go off.
• If the battery remaining drops below 33 percent, the symbol turns red and alerts
the operator.
Technical manual-C190CubetapePRO
42