Scan; Measure - Parceltools C190 CubetapePRO Technical Manual

2.

2.3.1 Scan

• Turn on the device and "Scan Barcode" is indicated on screen.
• Aim the scanner at a proper tilting angle (ideally perpendicular to the scanning surface).
• Press to scan.
Figure 2-1 Scan Operation

2.3.2 Measure

• Stretch the tape tip to one end of the object, then align the Tape Stop with
other end of the object.
• Make sure the tape is parallel with the edge of the object during measurement
• Measure item length.
• Record measured length by pressing
• Measure item width.
• Record measured width by pressing
• Measure item height.
• Record measured height by pressing
or
or
or
Technical manual-C190CubetapePRO
9