Parceltools C190 CubetapePRO Technical Manual page 30

4.
4.2.2.1 PC Connection
• Make sure Bluetooth is enabled on your PC.
• Turn on the CubetapePRO.
• Enter Settings on Cubetape, inside the Bluetooth option, select "BT SPP" by pressing
See Chapter 3 Section 3.2.1.1 for more details, or configure using Cubetape Manager.
• Click on the "Bluetooth Device" icon at the bottom right corner of your PC screen,
then select "Add a Device."
• Cubetape should be displayed in the "Add a Device" dialogue box. This may take a
short while and may need to be repeated if the device is not found. See Figure 4-1.
• Highlight Cubetape, select "Next," and you may see the "Select a pairing option"
dialogue box. (This step can be omitted if the host is using SSP Bluetooth pairing).
See Figure 4-2.
and
Figure 4-1
Technical manual-C190CubetapePRO
.
29