Advanced Menu Item; Disconnect - Parceltools C190 CubetapePRO Technical Manual

3.
Select from a list of available Bluetooth configuration options (serial slave, PDA SPP, PDA HID,
PC SPP, and PC HID), enter the 12 digit Bluetooth MAC address of the device to be paired with,
and click Generate to produce a pairing barcode.
Print out the barcode. And scan the barcode under the scan window of Cubetape. See Figure 3-18.
The Cubetape will pair Bluetooth automatically. See Figure 3-19. After the paring successfully (wait
for 5 seconds), the Bluetooth icon on the bottom right corner would turn to blue.

3.3.8 Advanced Menu Item

• Advanced menu option allows password access to factory settings only.

3.3.9 Disconnect

Press Exit on Cubetape for exit and restart after the configuration has been written into Cubetape.
• Close the Cubetape Manager application and disconnect the USB cable.
• Cubetape will restart with the new configuration.
Note: Please remember to write configured settings onto the device before closing the
application or disconnecting, otherwise all configured data will be lost.
Figure 3-18
Technical manual-C190CubetapePRO
27