Connection Method; Connection Procedure - Parceltools C190 CubetapePRO Technical Manual

4.
Example of the Formatted Data Output:
ID1=BC23015234, PC=3, LL=1170, WW=1170, HH=560, VV=73.45, DW=500, UN=mm
4.5 Pair with Supported Weighing Scale
The CubetapePRO is specially optimized for tasks in combination with supported weighing
scales.

4.5.1 Connection Method

The CubetapePRO is connected with the weighing scale via Bluetooth
communications. The weighing scale should have a Bluetooth interface available.
Make sure to select the "Weigh" application in the Cubetape Application menu, as
discussed in Chapter 2 Section 2.4.1.2, for connection preparation.

4.5.2 Connection Procedure

Find the 12-digit Bluetooth MAC address of the weighing scale. Create the barcode as the
following format: <Fnc 1>112233445566, where "112233445566" is the MAC address of the indicator.
This barcode also can be created using the Scan to Pair utility by the Cubetape Manager
software detailed in Section 3.3.8. Sample barcode as follows:
and
{comma}
{tab}
{cr}
{If}
*{star}
/{slash}
{custom-start}
{custom-end}
Technical manual-C190CubetapePRO
36