Global Settings - Parceltools C190 CubetapePRO Technical Manual

3.

3.3.5 Global Settings

The Global setting tab is used to set the device parameter including Units, Dimensional-Weight
Factor, Pallet Size, Communication Method, Audio Feed back etc... for CubetapePRO.
• Use the navigation arrows on the menu bar and click on "Global Settings" tab. See Figure 3-5.
• To change the unit for measurement, adjust in "Units of Measure" bar. See Figure 3-6.
• To change values of dimension-weight factor, default pallet size, adjust in corresponding
bars under "Global Settings" tab. Note that pallet width and length are always expressed
in centimeters.
• To change the communication method, adjust in "Comm Method" bar. For the on live
application, the communication should be set as Bluetooth (BT-SPP or BT-HID).
USB port is usually used for Batch Mode See Figure 3-7.
Figure 3-5
figure 3–4
Figure 3-6
Technical manual-C190CubetapePRO
22