pottery barn kids STAR WARS BED Assembling Instruction page 4

ASSEMBLY INSTRUCTIONS
1. Make sure the Footboard (A) is fully assembled followed separated AI. Lay down (A ) on a Styrofoam taken from
the carton as seen in the illustration below. Using Platform Panel (I) as an measurement to make sure the
Footboard is placed straightly as shown below.
2. Attach (G) to (A), with the wooden dowels and pre-drilled holes aligned, as seen in the illustration below.
*Tip: See Image A for ease of assembly.
Image A
Date: 2015-Jun.-18
Rev:
NO T OK
Styrofoam
L 1x
M 1x
N 1x
O
1x
Page 4 of 14