Connection On The Rear Panel Of The Housing; Information Concerning The Software - IFM Electronic CR0451 System Manual

System description
3.1.4

Connection on the rear panel of the housing

M12 connector, A-coded, for supply and CAN:
Illustration Pin Designation
1 n.c.
2 VBB
3 GND
4 CAN_H
5 CAN_L
3.2

Information concerning the software

The device operates with CoDeSys, version 2.3.9.21 or higher.
In the "programming manual CoDeSys 2.3" you will find more details about how to use the
programming system "CoDeSys for Automation Alliance". This manual can be downloaded free of
charge from website at:
ifm's

www.ifm.com > select your country > [Service] > [Download] > [Control systems]

DVD "Software, tools and documentation"
ecomatmobile
The application software conforming to IEC 61131-3 can be easily designed by the user with the
programming system CoDeSys ( www.3s-software.com). Before using this software on the PC
please note the following minimal system requirements:

CPU Pentium II, 500 MHz

Memory (RAM) 128 MB, recommended: 256 MB

Free hard disc required (HD) 100 MB

Runtime system platform Windows 2000 or higher
NOTE: Not yet released for the 64-bit platforms of Windows Vista and Windows 7

CD ROM drive
Moreover the user must take into account which software version is used (in particular for the
operating system and the function libraries).
NOTE
The software versions suitable for the selected target must always be used:

operating system (CRnnnn_Vxxyyzz.RESX),

PLC configuration (CRnnnn_Vxx.CFG),

device library (ifm_CRnnnn_Vxxyyzz.LIB )

and the further files ( chapter Overview of the files and libraries used (→ page 236))
CRnnnn device article number
Vxx: 00...99 target version number
yy: 00...99 release number
zz: 00...99 patch number
The basic file name (e.g. "CR0401") and the software version number "xx" (e.g. "01") must always have
the same value! Otherwise the device goes to the STOP mode.
The values for "yy" (release number) and "zz" (patch number) do not have to match.
System Manual
ifm ecomatmobile
Note
----
8...32 V DC
terminal 31
BasicDisplay (CR0451) V01

Information concerning the software

8351
8484
11