Leica M Monochrom Instructions Manual page 64

Procedure
1. Press the button (1.21).
SET
The corresponding sub-menu appears in the
monitor (1.32).
Notes:
The setting process can be cancelled at any time,
either by pressing the button (1.26) to return to
PLAY
normal review mode or by tapping the shutter release
button (1.19) to switch to picture mode.
The following
controls and their functions are not available during
the entire setting process:
DELETE
(1.22) buttons
The subsequent procedure is controlled by the menu,
section (see p. 26). After specifying the relevant menu
display, this is done using the setting dial (1.29), the
direction buttons (1.30) and the
2. The first step is to decide
whether you want to protect individual pictures
Protect Single
simultaneously protect all pictures
whether you want to clear the existing protection
for individual pictures
for all pictures
Note:
The following functions cannot be performed and the
menu text appears in white instead of black to indicate
this:
– Protecting a picture that is already protected, or if all
pictures are already protected.
– Clearing the protection for a picture that is already
(1.24) and
INFO
unprotected, or if no pictures are already protected.
button (1.21).
SET
, or
, or
Protect All
, or
Unprotect Single
.
Unprotect All
DISPLAYS AFTER PROTECTION /
CLEARING PROTECTION
After exiting the menu, the original monitor display
appears again, with the corresponding symbol
Note:
The symbol also appears if a picture that is already
protected is opened.
145