Leica M Monochrom Instructions Manual page 80

5. The monitor is too dark or too bright.
5.1 When viewing the monitor image from wide angles
it is always more difficult to see.
If it is too light or too dark although you are looking
at the monitor full on: Select a different brightness.
6. The picture I have just taken is not shown
in the monitor
6.1 Is the function activated (when the
Auto review
Leica M Monochrom is set to picture mode)?
7. I cannot display the picture.
7.1 Is a memory card inserted?
7.2 The memory card does not contain any data.
8. Despite being connected to a computer, I
cannot transfer any data.
8.1 Check whether the computer and the camera are
connected correctly.
9. The date and time displays show incorrect
values or are blank.
9.1 The Leica M Monochrom has not been used for
a long period, particularly if the battery has been
removed.
1. Insert a fully charged battery.
2. Set the date and time.
161