Leica M Monochrom Instructions Manual page 36

5. In the sub-menu
Max ISO
– select the range in which the automatic function
will operate by specifying the highest sensitivity to
– in the sub-menu, set whether
Slowest speed
you want to leave it to the camera to set shutter
speeds that prevent blurring – by selecting
- or
dependent
– whether you want to specify a maximum shutter
speed in the range between
1
whole steps).
If you select
Lens dependent
higher sensitivity if a lower brightness would cause
the shutter speed to fall below the
threshold, e.g. at slower speeds than
35mm lens.
Note:
When using automatic bracketing (see p. 127) all AUTO
ISO settings are defined:
- The sensitivity automatically determined by the
camera for the first picture is also used for all other
pictures in a series, i.e. this ISO value is not changed
during a series.
Lens
- The settings in the AUTO ISO sub-menus have no
effect, i.e. the camera's full shutter speed range is
available.
s and s (in
1
125 8
only switches to a
1
Focal length
s with a
1
30
117